RADIOIONICS™ RESEARCH
RADIOIONICS™ RESEARCH
RADIOIONICS™ RESEARCH
Would you like to react to this message? Create an account in a few clicks or log in to continue.

RADIOIONICS™ RESEARCH

COPYRIGHT © 2016 - 2019 - ALL RIGHTS RESERVED
 
Latest imagesHomeRegisterLog in

 

 Construction of Ion Valve/detector

Go down 
4 posters
AuthorMessage
warrensk

warrensk


Posts : 8
Join date : 2012-12-31

Construction of Ion Valve/detector Empty
PostSubject: Construction of Ion Valve/detector   Construction of Ion Valve/detector Icon_minitimeApril 23rd 2013, 1:00 am

Hello all,

Ive got high grade quartz, mica, bismuth, a pyrite crystal and pitchblende ore. I have means of making an ion detector or ion valve. I am having trouble finding the best ways to go about this from what ive got...

For the ion detector, I am getting the idea of an old school crystal detector. Much resembling a pyrite crystal nestled into a piece of bismuth. The bismuth would contain radioactive impurities....in other words ground up pitchblende mixed into molten bismuth and then cooled.

For the ion valve, I was thinking of grinding the quartz, mica and pitchblende into a capacitor of some sort that will be attached to a vacuum tube for which the capacitance can discharge into. The positive terminal of the capacitor will be connected to an aerial. Supposedly once a discharge occurs, the highly rarefied gas inside the vacuum tube will vibrate at high oscillations in vibration with the cosmos and let ions flow in opposite reaction to the initial spark creating a high frequency vibration. This high frequency can be stepped down to be used to power a number of different loads. I am wondering if the discharge needs to be through the quartz or if it can happen in a vacuum tube alone. Any help/insight would be great.

Thanks,

Warrensk
Back to top Go down
warrensk

warrensk


Posts : 8
Join date : 2012-12-31

Construction of Ion Valve/detector Empty
PostSubject: Electron source for HV radiant energy   Construction of Ion Valve/detector Icon_minitimeApril 23rd 2013, 10:55 am

After reading a lot of papers about Thomas Moray and his ion valve, It seems he was interested in the reaction that takes place between pitchblende and bismuth. Viewing the pitchblende as a source for neutrons, alpha particles and decay products....Pitchblende is a U238 ore which can contain trace amounts of Po 210....

U238 undergoes alpha decay to produce Thorium 234 which then undergoes alpha decay to produce Radon which in turn deposits Lead 210 which is a beta emitter (electrons) Very Happy

Po 210 is a neutron emitter....Mix this with Bi 209 and you've got yourself Bi 210 which decays into PO 210 via BETA emission. Po 210 then emits more neutrons and bombards bismuth 209 again to make Bi 210 turning into Po 210 via beta emission...... More electrons Very Happy see the cycle? The bismuth 209 will eventually degrade into Po 210 which degrades into stable Lead 206...

So, pretty much U238 likes to decay into "stuff" that emits electrons....Mixing pitchblende with bismuth uses the bismuth as a intermediate to uptake more neutrons to essentially release more electrons.

Hence we come to another idea, these radioactive rocks that are essentially part of the earth everywhere are constantly decaying into various radioactive substances that emit BETA PARTICLES....

Could these radioactive substances be responsible for earths ever growing negative charge in reference to the atmospheric potential? This would basically mean this slew of radioactive stuff mixed together would do the same thing, ever charging the earth as the negative plate of a capacitor....

Essentially this will give a source of electrons to combine with positive ions from the atmosphere, creating current....Get an antenna in the air and collect positive ions in reference to the ground would essentially be the idea of Tesla. The key oscillator is one of radioactive decay constants....put one of these nice and close in your circuit and you have an excess of electrons to add to your ever rising atmospheric potential.

Tesla loved the idea of resonantly oscillating electrons from the earth into the air, he was essentially helping out the radioactive isotopes emitting beta particles get rid of their excess electrons to recombine with the positive ions of the radiant rain of ions. Between this reaction is where cold electricity lies.....in other words this would be our power output.

Hence a HV DC power source could be discharged through a primary in inductive relation to the secondary. The secondary when excited would be the link for electrons (negative ions) to recombine with positive ions, producing cold electricity. Our source of electrons and motive power would be that of the environment rather than from our batteries.....Thus we get efficiencies that blow any symmetrical design out of the water. This view of a tesla coil would be an asymmetric resonant transformer....Key word, ASYMMETRIC

I could be crazy, let me know what you think....


Warrensk
Back to top Go down
Bruce A. Perreault
Admin
Bruce A. Perreault


Posts : 88
Join date : 2012-07-12
Location : White Mountains, New Hampshire (USA)

Construction of Ion Valve/detector Empty
PostSubject: Re: Construction of Ion Valve/detector   Construction of Ion Valve/detector Icon_minitimeApril 30th 2013, 11:59 am

Hello Warrensk,

Yes, the radioactive decay processes certainly do contribute to the earths ever growing negative charge.

I believe that you are right on target with your theory.

The recombining of the negative and positive charge generates electromagnetic oscillations or electrical energy. This is where electrostatic charge is transformed into useful electromagnetic energy that can be converted to what our appliances require.

The best "detector" combination I've found is zincite and bornite.

It's been spooky quite lately on this forum... sorry for the delayed response, as I've been extremely busy with the research and with all of my obligations. -Bruce P.

Back to top Go down
http://www.radioionics.com
dynatron




Posts : 3
Join date : 2013-05-02

Construction of Ion Valve/detector Empty
PostSubject: Re: Construction of Ion Valve/detector   Construction of Ion Valve/detector Icon_minitimeMay 2nd 2013, 6:22 am

Bruce A. Perreault wrote:
Hello Warrensk,

Yes, the radioactive decay processes certainly do contribute to the earths ever growing negative charge.

I believe that you are right on target with your theory.

The recombining of the negative and positive charge generates electromagnetic oscillations or electrical energy. This is where electrostatic charge is transformed into useful electromagnetic energy that can be converted to what our appliances require.

The best "detector" combination I've found is zincite and bornite.

It's been spooky quite lately on this forum... sorry for the delayed response, as I've been extremely busy with the research and with all of my obligations. -Bruce P.

Hello Bruce! Whether used Don Smith in the devices the valve of an ion or similar? I had a problem of transformation of cold electricity in conductivity current. The increase in power is a little noticeable. Thanks!
Back to top Go down
dynatron




Posts : 3
Join date : 2013-05-02

Construction of Ion Valve/detector Empty
PostSubject: Re: Construction of Ion Valve/detector   Construction of Ion Valve/detector Icon_minitimeMay 7th 2013, 7:56 pm


thanks, already understood. I earned an isolation trance.
It should be supplied with electrons from the earth instead of from the coil.
Everything works! ! ! !
In total as described Don Smith!
Back to top Go down
soundiceuk




Posts : 46
Join date : 2012-07-12
Age : 44
Location : UK

Construction of Ion Valve/detector Empty
PostSubject: Re: Construction of Ion Valve/detector   Construction of Ion Valve/detector Icon_minitimeMay 28th 2013, 9:25 pm

Sorry I've been away for such a long time guys.

Interesting to hear your research Warren. Cool



Please can you explain your discovery Dynatron?

Best regards,

Paul Very Happy
Back to top Go down
dynatron




Posts : 3
Join date : 2013-05-02

Construction of Ion Valve/detector Empty
PostSubject: Re: Construction of Ion Valve/detector   Construction of Ion Valve/detector Icon_minitimeMay 29th 2013, 2:02 pm

Paul M. Townley wrote:
Sorry I've been away for such a long time guys.

Interesting to hear your research Warren. Cool



Please can you explain your discovery Dynatron?

Best regards,

Paul Very Happy
Hello Paul! ! !
Everything is simple. The quantity of captured energy from the earth depends on quality of grounding. The Resonant coil creates analog of an ionosphere for the score high frequency and a high tension. Charges of the positive sign prevail. Therefore electrons from the earth also run to the coil charging thus the storage capacitor.
Energy in the condenser is suitable for the inductive loadings. Still I deal with the transformer of insulation of the inverter. It too not the normal. There shall be an asymmetry from the primary winding to secondary. It is a pity that Bruce can't help with this question.
yours faithfully.
Back to top Go down
soundiceuk




Posts : 46
Join date : 2012-07-12
Age : 44
Location : UK

Construction of Ion Valve/detector Empty
PostSubject: Re: Construction of Ion Valve/detector   Construction of Ion Valve/detector Icon_minitimeJune 1st 2013, 5:42 am

Hi Dynatron, I read your message today and then saw this video in my email which is kind of related.



https://www.youtube.com/watch?v=GKusVt7jLoY


I do appreciate Bruce's position, we have to tread slowly and carefully in the inventors footsteps.

The secrets of how to harness the universes energy must not be kept by secret governments and black ops military.

They should not be taken to the grave either by inventors.

The YouTube & forum experimenters are slowly walking in Tesla's and other great inventors footsteps.

Retracing where our human progression has been side tracked and interfered with.

Asymmetry is one of the main things that has been purposely cut out of our education because it didn't suit the political agenda of the ruling elite.

One of my favourite phrases I read recently.

Three things that cannot be hidden for long; the sun, the moon and the truth!

It is a shame the ruling elite have done such a good job dividing our people from around the world.

The media have created a world soap opera and divided our countries through religion, false flag attacks, lies and deception.

The result is no one trusts each other.

Even in UK people find it very hard to trust each other.


Divide and conquer has been the main tool to create this scenario.


I guess that after some bad experiences many years ago, Bruce doesn't want to place himself in the firing line or be responsible for handing over the key to virtually unlimited energy whilst there are extreme forces that can eliminate its existence and deny him of the fruitful life he deserves, not to mention the extremely positive future the technology may bring.


I agree we need to move forward as a global collective, so the information is shared more.

My understanding is that it is no good giving the end result otherwise the part in the middle, that was fundamental to understanding, will be missed and never understood.


I think that what Bruce has surpasses anything else that exists.

It's difficult for me to explain how I know this, but I have been working fairly closely with Bruce for over a year.

I see a lot of great things happening this year with our research.

We may not have Tesla's budget, but we have a global way of sharing our experiments.

When things really get moving we will have the funding and the global collective providing input and experimentation.

There are some great builders and innovators amongst us.

There are many who haven't even found the pathway yet too.


Dynatron, you are welcome to share your findings here. There are a lot of highly skilled experimenters as well as Bruce who are watching this space and may provide input.

Best regards,

Paul Very Happy





Back to top Go down
Sponsored content





Construction of Ion Valve/detector Empty
PostSubject: Re: Construction of Ion Valve/detector   Construction of Ion Valve/detector Icon_minitime

Back to top Go down
 
Construction of Ion Valve/detector
Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
RADIOIONICS™ RESEARCH :: RADIANT ENERGY RESEARCH & DEVELOPMENT-
Jump to: